Tuesday, June 15, 2010

Sylvia’s Bridal Sampler Row F6-F10 Plus Bonus Piecing Tips

This weekend I finished Row 7 of my local quilt shop’s Sylvia’s Bridal Sampler BOM.  These blocks were pretty simple to do and I think they came out remarkably square!  Go figure! :o)
IMGP3751
The star block did pose some tricky piecing, so I wanted to share a few hints to help you do this block accurately.  The directions have you strip piece the diamond pieces and this works slick.  But when you go to sew your pairs of diamonds together it is really hard to get the points to match.  When you put them right sides together you have to put a pin in the place where the 2 seams come together.  That can be really tedious, and doesn’t always end up in a match.  So here is what I did:
IMGP3704
Line the seam up like the picture below.  Make sure you have pressed the seam allowances in opposite directions so the seam nests together nicely.  The two patches should just meet at the seam line.
IMGP3705
Put this unit under the presser foot so that the needle pierces the seam and the presser foot aligns with the edge of the top patch.
IMGP3716
Lift the presser foot, but not the needle. Hold onto the top patch and pivot the lower patch counter-clockwise, leaving the needle in place until they are aligned with each other.
IMGP3718      IMGP3711
Now stitch from this center point to the end of the seam.  Then flip the patch over and sew the other half of the patch, overlapping your stitching in the middle (over the seam).
IMGP3721 The stitching should begin and end where the two patches intersect on both ends.  Doing it this way insures that the ends match and the center point matches perfectly.
IMGP3722   IMGP3725
Press the seam open on the back and trim up the patch to get rid of the dog ears.  The finished diamond four patch should look like this:
IMGP3727  Then you are ready to add the 2 triangles to complete the unit.
Using this technique I was able to zip through all 8 diamond four patches for the blocks really fast, and everyone of them matched!  Shazam!
IMGP3734   IMGP3738
The block goes together much easier this way, and the centers and seams are easier to match. 
Whoo hooo, I love it when a plan comes together!!
Reeze

5 comments:

  1. Love the colors of your Slyvia's Sampler quilt. I've never seen that method of matching point on blocks used before, but it worked great. Although I made a quilt from these patterns I didn't make all the blocks and this was one of the blocks I skipped.

    ReplyDelete
  2. What a neat idea for perfect intersections. I'll have to try it next time.

    ReplyDelete
  3. Reeze, you are the greatest.!! What a fantastic idea. I bet it would work with other blocks as well. Thanks for sharing, I am going to try it next time I have blocks that don't seem to want to match up.

    ReplyDelete
  4. I'm making the hanging diamonds quilt and was going crazy until I tried this method. THANK YOU!

    ReplyDelete

I'd love to know what you think! Thanks for sharing your ideas.